Enervent Salla is best suited for apartments, detached houses and villas. It is a perfect ventilation unit for spaces that many other units can’t fit into. Going short of size does not mean going short of features – Salla is proof that efficiency does not equal size.
Enervent Salla is lower than most ventilation units and it has a built-in water lock for condense water. Due to these features, no installation space is required under the unit. It can i.e. be placed over a washing tower.

The CHC model has a connection for the cooker hood, which means no separate extract duct for the cooker hood is needed.

General information

Air volume flow:  50…360 m³/h                                                                                                                                                                                                                                                                                    EcoDesign classification: A                                                                                                                                                                                                                                                                                        Reference flow rate according to EcoDesign directive (50 Pa): 252 m³/h
Pressure difference: 15 to 125 Pa
Leakage external: < 5% (test pressure 300Pa)
Leakage internal: < 5%
Duct size: Ø 160 mm

Duct size CHC: Ø 125 mm

Weight: 50 kg
Standard filters: ISO ePM1 70 % / ISO Coarse 90 % (F7/M5)
IP class: IP44 (external control IP20)
Condense connection: ¼” internal thread
Nominal voltage: 230 V
Nominal current: Motors 1,8 A total, electrical after heating 1.7 A

Fans

Supply and exhaust air fan type: Ebm-Papst
Supply and exhaust air motor type: G3G146-ED19-10
Nominal voltage: 230 V (AC), EC-type with internal electronics
Type of fan blade: Radial forward
Nominal power: 118 W
Acoustical data: 65 dB(A) DIN 45635-1 ISO 3745
Fan control eWind control: 4 step (parallel running, possibility to drive supply -20% lower to +10% higher than exhaust). Each step can be adjusted within 20% scale.

Heat recovery

Heat exchanger type: Rotating heat exchanger
Heat exchanger material: Aluminium
Heat exchanger surface: 57 m²
Heat exchanger dimensions: 370 x 200 mm (60 μ)
Heat exchanger motor: 5 W
Ventilation unit annual temperature efficiency (EN 13141-7:2010): 84 %
Supply air annual heat recovery efficiency* (EN 16798-3:2017): 96 %
Extract air annual heat recovery efficiency* (D5:2012): 83 %
* supply air +18°C, extract air +21°C, exhaust air temperature limit -7°C

Other information

Material inside cover: Steel sheet, zinc coated
Material outside cover: Steel sheet, zinc coated, powder painted
Standard electric after heater efficiency: 400 W